Innovative kitchen corner unit solution from Vibo This kitchen corner unit solution is designed as a technically clean full-extension system for base units in corner areas. It is aimed at anyone who wants to make functional use of the hard-to-reach storage space in the corner unit without having to rely on complicated movement sequences or restricted access. The system consists of a fully customised mechanism and matching baskets and is designed for long-term use in the kitchen. The construction is clear, robust and designed for smooth movement, even with heavier loads.Details:Full-extension runner for corner base units with direct access Can be installed for 45 cm, 50 cm and 60 cm corner cabinet doors Reversible mechanism for left or right Two independently movable levels Pre-assembled soft-close system High load capacity up to 50 kg total load Galaxy and Urban basket versions with melamine base Kitchen corner unit solution for cabinet areas that are difficult to access A kitchen corner unit solution must do one thing above all: make the otherwise impractical corner space fully usable. This is exactly where this system comes in. The two baskets are guided out of the cupboard in a controlled manner when it is opened and bring the entire contents into the visible and accessible area. You don't have to reach deep into the cupboard, everything is right in front of you. The design works with two independent movement levels so that the baskets are guided neatly and do not jam against each other. The mechanism is designed for corner base units with door widths of 45, 50 or 60 cm. The reversible design means that it can be installed on the left or right. This is particularly relevant in kitchen planning, as the corner solution can be flexibly adapted to the respective room and furniture situation. Kitchen corner cupboard pull-out with full-extension runners and soft-close The kitchen corner cupboard pull-out works as a full-extension pull-out system. Both baskets extend completely out of the carcase and remain stably guided. The integrated soft-close system is already pre-assembled and ensures that the baskets are slowed down in a controlled manner when closing. This protects the mechanism and ensures smooth, even closing behaviour in everyday use. The load capacity is clearly defined. The mechanism is designed for a maximum total load of 50 kg. The front baskets can each carry up to 15 kg, the inner baskets up to 10 kg. These values are practical and take into account typical kitchen loads such as pots, pans or provisions. The design results in an increase in usable volume of up to 29 per cent compared to conventional corner solutions. Corner kitchen solution with sophisticated basket variants and materials There are two basket variants to choose from for this corner kitchen solution. The Galaxy model range consists of open baskets made of 10 x 4 mm wire rails with a melamine base. This design offers a good overview and is suitable for users who prefer an open structure. The Urban range uses closed aluminium baskets, also with a melamine base. This version has a calmer appearance and keeps the contents of the cupboard visually understated. Melamine plays a central role here. The shelves are resistant, insensitive to moisture and easy to clean. This is a decisive advantage, especially in everyday kitchen use. The combination of aluminium, metal and melamine ensures stable baskets that retain their shape even under heavy loads. The system is supplied as a complete unit, consisting of the mechanism and baskets. Assembly is clearly structured and can be carried out neatly, as all components are matched to each other. You get a technically sophisticated corner solution that utilises the available space consistently and functions reliably in everyday use. FAQ about the kitchen corner unit solution What cabinet sizes is the solution suitable for? The system is designed for corner base units with 45 cm, 50 cm or 60 cm wide doors. Can the kitchen corner unit pull-out be fitted on the left or right? Yes, the mechanism is reversible and can be installed on the left or right. What is the load capacity of the kitchen corner solution? The mechanism can bear a total load of up to 50 kg. The front baskets can each carry up to 15 kg, the inner baskets up to 10 kg. What are the advantages of melamine shelves? Melamine is easy to clean, moisture-resistant and resistant to everyday wear and tear in the kitchen. What is the difference between Galaxy and Urban? Galaxy has an open structure made of wire rails, Urban consists of closed aluminium baskets. Both versions have a melamine base. You can find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page

Precision and stability: why a table extension system is indispensable A high-quality table runner system is the centrepiece of any table construction where flexibility and stability are required. With the Alu Frontslide Universal 55, you get a solution that has been designed for undivided tops and impresses with its precise running technology and high load-bearing capacity. The system combines modern aluminium production with a compact design, which is ideal for demanding tables in professional use. Whether for indoor or outdoor use, this pull-out system offers reliable performance with minimum space requirements. Details of the pull-out: Material: High-quality aluminium, press-finished or in various anodised colours (C0 clear, C35 black). Load capacity: Load capacity up to 115 kg with even load distribution. Installation height: Only approx. 59 mm - ideal for slim table designs. Running technology: Ball-bearing castors for quiet, smooth running and high abrasion resistance. Outdoor capability: Available in 55 mm height, also in stainless steel, suitable for outdoor use. Accessories: Can be combined with a screw brake, FM/FM Stop folding mechanism or the flat FFM folding mechanism. Customisation: Freely selectable width, various RAL colours on request. The Alu Frontslide Universal 55 table extension system for versatile table constructions The Alu Frontslide Universal 55 impresses with its high-quality workmanship and versatility. With a load capacity of up to 115 kg, it is ideal for robust and durable table constructions. The ball-bearing castors ensure particularly smooth and even running, which remains stable and quiet even under heavy loads. The low installation height of just 59 mm enables a slimline table design without restricting functionality. A particular highlight of this system is its high degree of customisation flexibility. The profiles offer four channels on the front edge, which make it possible to cut a separate thread for connecting crossbars. This creates additional stability and expansion options. In combination with matching accessories such as the FM/FM Stop or FFM folding mechanism, tables can be extended efficiently and individually. Colour customisations in black (C35 anodised) or other RAL colours are also available on request. Whether for indoor or outdoor use - thanks to its outdoor capability in the stainless steel version, the system fulfils the highest requirements. The freely selectable width enables customised adaptation to specific projects and areas of application, from conference tables to kitchen counters. Why the aluminium Frontslide Universal 55 table runner system is impressive A reliable table runner system such as the Alu Frontslide Universal 55 offers numerous advantages for table constructions. The ball bearing technology enables precise and smooth running, which is particularly important for intensive use and heavy loads. The use of aluminium not only ensures low weight, but also high stability and durability. In addition, the system remains permanently efficient thanks to its abrasion-resistant surface and precise profile geometry. The expandability with accessories such as folding mechanisms or screw brakes makes the system a flexible solution for a wide range of requirements. With the optional crossbars and end edge channels, additional stability can be integrated without the need for complicated adjustments. The freely selectable widths and the option of colour customisation offer you a high degree of individuality for your table projects. Whether in series production or for customised individual pieces - the aluminium frontslide Universal 55 meets the requirements for functionality, stability and design. It is the ideal choice for manufacturers who need reliable and durable solutions for table systems. You can find everything you need to know about pull-out fittings here: Table runners info page. If you are looking for the right runner for your project, please use our table runner application search.

The practical larder pull-out is the perfect kitchen organiser This larder pull-out is designed as a technically sophisticated organiser system for tall kitchen cabinets. At its centre is a stable frame construction that neatly guides several baskets and provides controlled access to the entire cabinet contents. The system is designed for a front width of 60 cm and is aimed at kitchens where clarity, load capacity and a clear structure are required. Thanks to the swivelling pull-out, the baskets move outwards together with the door so that the entire contents are directly in front of you.Details: Tall unit pull-out for 60 cm front width Up to 12 drawers per side can be realised Self-supporting frame construction High-quality materials made of aluminium and melamine-coated shelves Reversible for left or right mounting Suitable for 120° door opening Removable baskets for easy cleaning Tall unit pull-out for structured storage and kitchen organisation The larder pull-out is designed for tall kitchen cabinets where the available storage space needs to be fully utilised. The combination of frame, door connection and several basket levels creates a system that swings out together when opened. You do not have to reach into the cupboard or move individual levels separately. All baskets can be accessed at the same time, which makes everyday life much easier, especially when storing provisions, jars or packaging. The construction is self-supporting and can be detached from the cabinet body. This makes both assembly and subsequent cleaning easier. Depending on the cabinet height, different numbers of baskets can be realised. Two sets of inner baskets and two sets of door baskets are recommended for a height of 1150 mm, and three sets for a height of 1675 mm. This allows the larder pull-out to be customised exactly to the existing height. Kitchen cabinet pull-out with sturdy frame construction and high load capacity As Kitchen cabinet pull-out the system is designed for heavy loads. The frame can support a total weight of up to 130 kg and remains dimensionally stable even when fully loaded. The inner baskets can each bear loads of up to 20 kg, the door baskets up to 5 kg per basket. This division is practical and takes into account the fact that heavy items tend to be stored inside the cupboard, while lighter items are stored in the door areas. The baskets are made of aluminium frames with melamine-coated wooden shelves. Melamine is hard-wearing, moisture-resistant and easy to clean. This is a clear advantage in the kitchen area in particular, as soiling can be removed quickly and the shelves retain their surface even with frequent use. All baskets are removable, which makes cleaning even easier. Kitchen larder pull-out for maximum organisation and clean movement The kitchen larder pull-out works with a swivelling mechanism that is designed for a door opening of up to 120°. When opening, the pull-out follows the door movement and removes the baskets completely from the cupboard. The movement is smooth and controlled so that there are no jerky movements, even with heavy loads. The mechanism is reversible and can be mounted on the left or right. The system can be combined with baskets from other compatible series, allowing for flexible planning. The clear division into inner and door baskets provides a good overview of the entire cabinet contents. Each area is visible and accessible without baskets overlapping or blocking each other. The kitchen larder pull-out is therefore suitable for larders as well as for household cupboards or appliance cupboards. Frequently asked questions: What cabinet width is the larder pull-out suitable for? The system is designed for a front width of 60 cm and fits into standard larder unit carcasses. How many baskets can be fitted? Depending on the cabinet height, several basket sets are possible. Two sets are recommended for a height of 1150 mm and three sets for a height of 1675 mm. What is the difference between inside and door baskets? Inner baskets are more resilient and designed for heavy items. Door baskets are designed to be lighter and are intended for smaller or lighter items. Why is melamine used for the shelves? Melamine is easy to clean, moisture-resistant and robust. It is particularly suitable for kitchens that are cleaned regularly. Can the kitchen cupboard pull-out be fitted on the left or right? Yes, the mechanism is reversible and can be fitted on the left or right depending on the installation situation. You can find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page

Stair connectors for demanding constructions: The Herkules fitting set delivers maximum stability The Herkules fitting set was specially developed for use in staircase construction and stands for maximum connection strength combined with efficient installation. Whether as a reliable stair connector for spiral steps, load-bearing constructions or challenging installation situations - the set impresses with its force-fit and durable connection technology. Thanks to the combination of solid steel and precise thread technology, the set offers the exceptionally high load-bearing capacity required in staircase construction. All elements interlock perfectly, enabling a self-centring, vibration-resistant connection without additional gluing or pinning. The assembly is concealed and creates a visually calm, high-quality overall appearance - ideal for staircase constructions with architectural requirements.Summary: Application: Stair connector for spiral or straight steps Set contents: 2x housing ø18 mm with pre-assembled grub screw, 2x or 10x Herkules Euro 10 dowels Material: galvanised steel Housing dimensions: ø18 × 30 mm Dowel size: Euro 10 × 25 mm High contact pressure due to precise thread guidance Self-centring, no lateral displacement Concealed connection - no visible fasteners Suitable for panel thicknesses from approx. 40 mm No glue or wooden dowel connections required Easy installation even in difficult installation situations Made in Germany Connecting fitting for staircase construction: Sophisticated technology for secure connections As a connecting fitting for staircase construction, the Herkules fitting set fulfils the highest requirements in terms of mechanical strength, repeat accuracy and processing quality. The system has been designed for professional use and is particularly suitable for places where a precise fit and powerful connection are essential - for example at transitions from stair stringers to steps or for landings. The pre-assembled grub screws in the housing make installation considerably easier and ensure a reproducible result, even for series installations. In combination with the housing, the stable dowel ensures a backlash-free connection that can also withstand dynamic loads in the long term. Scheulenburg fastening system: precision and strength combined in one system The Scheulenburg fastening system is known for its uncompromising quality and intelligent design. This philosophy is perfectly realised in the Herkules system: The combination of steel housing, precision-fit dowel and grub screw forms a heavy-duty fastening system that is suitable for a wide range of applications in furniture and staircase construction. You benefit not only from the simple installation, but also from a permanently secure connection that does not give way even under continuous mechanical stress. The Herkules system therefore offers maximum flexibility - with minimum effort. Here you can find the current Scheulenburg catalogue. This catalogue contains all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Optimum stability with the new ridge mouldingThe new ridge moulding from Pöttker sets new standards in terms of stability and durability for table tops. Made from roll-formed steel with a material thickness of 3 mm, this ridge moulding offers the perfect solution for supporting table tops against warping. Wood works - it expands when moist and contracts when dry. This is exactly where the metal ridge moulding comes into play: thanks to its stable construction and integrated slotted holes, the wood can continue to move naturally without affecting the shape of the table top. Summarised: Roll-moulded steel, 3 mm thick Oblong holes allow the wood to work Flush-mounted for a seamless look Powder-coated in black for additional protection Prevents warping of wooden boards from 21 mm thick Available in various lengths Why a steel ridge moulding is the ideal choice A steel ridge moulding is particularly robust and durable. Its robust design makes it ideal for holding large table tops securely and stably. The black powder coating not only gives the ridge moulding a modern look, but also offers additional protection against corrosion and external influences. The highlight: with the option of cutting threads into the bar, the table top can be decoupled from the table frame. This increases flexibility during assembly and at the same time ensures a permanently stable construction. The matching milling heads for manual routers and CNC machines facilitate precise assembly and guarantee that the ridge moulding is integrated flush and cleanly into the table top. When is a metal burr moulding useful? A metal burr moulding is particularly indispensable for table tops with a thickness of 21 mm or more. Such thick tabletops tend to warp or crack over time if they are not sufficiently stabilised. The Pöttker metal ridge strip provides precisely this stabilisation and ensures that your table top retains its shape for years - even when exposed to changing environmental influences such as moisture or temperature fluctuations. With its combination of sturdy steel construction and flexible mounting options, this ridge strip is the perfect solution for demanding table projects. Attention: Several routing passes are required for the hand router accessories, as they usually do not make it in one routing pass.Further information can be found on the information page for the V-ledge